1. Prepare the rock drilling cavern. The cavern specification can be determined according to the drilling method. Generally, the cavern height is 2.6-2.8 meters when drilling horizontal holes, and the cavern width is 2.5 meters and the height is 2.8-3 meters when drilling upward, downward or inclined holes.
2. Lead the gas-water pipeline and lighting line to the vicinity of the working face for use.
3. According to the requirements of hole design, the pillar shall be erected firmly. The upper and lower ends of the pillar shall be padded with wood plates, and the horizontal shaft and snap ring shall be installed on the pillar according to a certain height and direction. The machine shall be lifted by the hand winch, fixed on the pillar according to the required angle, and then the hole direction of the drill shall be adjusted.
Related News
-
What is the use of photovoltaic pile driver? What kind of environment is suitable
It was originally designed as a pre-piling equipment for photovoltaic power plants. Through research and development and upgrading, it can also be used in piling projects such as farms, pastures, and orchards. -
What are the characteristics and advantages of photovoltaic pile drivers?
The machine was originally developed for building solar power plants, but it can also be used in other areas, such as building new roads by securing road safety barriers by piling. -
Features and uses of photovoltaic pile drivers
Introduction to the characteristics and uses of photovoltaic pile drivers. When it comes to photovoltaic pile drivers, you may not know much about them. Below I will give you a brief introduction to photovoltaic pile drivers and the populari -
What are the characteristics of pneumatic drilling rigs? What are the advantages?
Pneumatic well drilling equipment, strong horsepower, fast drilling and fast water output. -
What are the characteristics and functions of air drills?
It is widely used in drilling water wells, detection wells, precipitation wells, rescue wells, ground source air conditioning holes, coal bed methane, natural gas, oil exploration and other projects.
